Here’s a project for you to make for the sports enthusiast in your home. Sure, this one is baseballs, but how hard would it be to make them in the shape and colors of footballs, basketballs, golf balls, etc.?
What’s a baseball quilt you ask? Well it’s something my husband has been begging me for ever since we got married. So finally, for his 50th birthday, I made it for him. He had explained what he wanted several times over the years and I guess it just took me some time to figure out how I was going to accomplish what he wanted.
His idea was to have an all white background and just the red stitches sewn on in the appropriate places so your eyes and mind could “see” the ball even though it really wasn’t there. I thought it sounded like a wonderful idea, but I just couldn’t figure out how to do it.
Now that I have this baseball quilt finished, I think if I just zeroed in on one baseball, I might be able to create what he was really after. However, that’s another quilt and another article! So, if you have interest in putting together a baseball quilt for the baseball enthusiast in your home, here’s how I did it.
1. I started with soft white cotton for my baseballs. I washed the fabric first and did some light ironing so it would at least lay flat.
2. I folded the white fabric in half lengthwise then I folded one end up as far as I needed to draw ¼ of a baseball. I kept my fabric tape measure at the corner of the four layers and made marks at 22” following the curve of the ball.
Once the marks were in place, I followed them with my scissors and cut out the only complete baseball in the quilt.
3. I then cut out portions of baseballs, though all from the same 44” circumference so they looked like they were all the same size ball, just fragments of each one. I did end up cutting out 4 complete baseballs and one of them I was able to get two pieces from making it look like there are 5 baseballs represented. I pinned them together to see how they would look and where they would overlap.
4. The edges were then ironed to the back at about ¼ inches.
5. Next, I filled in the spaces between the baseballs. If you look closely you can see that I then cut square and rectangular pieces of the brown background fabric I selected to fit and fill up the spaces between the baseballs. I pinned everything in place and then machine stitched the baseballs to the background. Then, because the dark brown fabric could be seen through the white baseballs, I trimmed off the excess background fabric close to the seams.
6. Now, the hard part….the stitching! I did use 5 different reds to make the stitching, one color for each baseball. I varied the finished length of the stitches from 3” at the longest to about 1” at the shortest to make the balls look three dimensional, but they were all ¾” wide. So, their cut size was 4” by 1 ½”. I ironed all the raw edges to the back, and then when I wanted the stitches to be shorter, I cut the length and simply folded the ends over.
I pinned all the stitches for one baseball in place before I machine stitched them on so I could be sure the ball looked like it was three dimensional. To make it dimensional, the stitches were long on one side of the stitch line and short on the other side. Notice too that I had to angle the edges of the stitches that went along the stitch line.
To make this baseball quilt look right, I had to get the curves of the stitching just right. To picture them I held a real baseball in my hand and closed one eye so I saw it in two dimensions only. From this I sketched the curves of the stitching onto the white baseballs in light pencil.
As each baseball was finished, the quilt got more and more interesting and three dimensional. I kept placing it on the floor to look at it and marvel at the fact that I had really done it!
Of course I could only look at it when my husband was out of town because as you recall, this fabulous and long awaited baseball quilt was a surprise for his 50th birthday!
7. Once all the stitching was in place, I layered a brown backing fabric with the quilt batting and the top. I pinned the three layers together and started the quilting process. I decided to follow the curves of the stitching on all the baseballs.
8. To make the background look different, I used brown yarn and simply punched through from the front to the back to the front again and tied the yarns.
9. The final step was using purchased binding tape to finish off the edges!
FYI – When the quilt was complete it measured 62″ wide x 82″ tall and the baseballs ended up being about 43″ in diameter.
This is one of those projects you create in your lifetime that is never forgotten. It was hard work, it took a lot of time, and it was made with love for someone special. What could be better?
OK, as many of you know, we’ve received all sorts of interest in our baseball quilt. Finally, someone has made one and has been kind enough to share photos of it.
Here’s what Wanda had to say, “I loved your quilt so much, I made one of my own. I cheated and used premade red single fold bias tape for the stitching. The finished size of the large center ball was 42″. It did take a lot of work but the recipient of the quilt loved it. I did an all over meander on my HQ16. My background was royal blue and the binding was red.
I live in MN and appliqued the Twins logo on the back corner of the quilt. Thank you for the awesome idea.”
Thank you so much to Wanda for allowing us to enjoy this beautiful baseball quilt she made.